Parent Directory	IMG_0508.JPG This is one of the shock mounts pre-mod.	IMG_0509.JPG Notice that the screw embeds itself inside one part of the base. On this side, there is a metal washer and a second washer made out of something that resembles cardboard.
IMG_0510.JPG Note the metal washer stuck to the paper washer.	IMG_0511.JPG Exploded slightly. Take the metal washer off for now.	IMG_0512.JPG This is the rubber washer I cut down to provide a friction surface.
IMG_0513.JPG Here is the reassembled screw. I have added two #10 (3/16" approx. interior diameter) washers, each about 3/8" across on the outside. These are placed on the screw first, followed by the original metal washer.	IMG_0514.JPG This is the rubber washer placed against the back of the mount piece. This goes on the side -opposite- the paper washer.	IMG_0515.JPG Sliding the sandwich together.
IMG_0517.JPG Putting the screw back in.	IMG_0518.JPG The completed shock mount. Note that it looks just the same as before.	IMG_0519.JPG This is what the rubber washer looked like originally. I had to cut it down because I couldn't get one the right size.